A simulator for Timepix-like pixel front-ends
Abstrakt
This work presents the development of a front-end simulation code for the Timepix3 readout chip [1], intended as digitizer stage in full detector simulation. The front-end electronics is modelled using an integrator stage and 3 parallel feedback loops with individually configurable time constants. The main feedback discharging the integrator consists of 3 low-pass filtered feedback loops. The leakage current compensation is approximated by an additional independent low-pass filtered feed -back loop. The system noise is modelled using independent bandwidth limited noise channels for pre -amplifier, feedback and threshold noise. The Timepix3 time of arrival (ToA) and time over threshold (ToT) measurement is implemented by a discriminator model with independent rise and fall times and 2 independent clock frequencies for ToA and ToT. The measured dependence of the ToT on the pre -amplifier input charge using test -pulses of a Timepix3 assembly is correctly reproduced for a wide range of discriminator settings.
Klíčová slova
- Detector modelling and simulations I (interaction of radiation with matter, interaction of photons with matter, interaction of hadrons with matter etc)
- Simulation methods and programs
- Solid state detectors
- Hybrid detectors
- Timepix3
- time of arrival
- time-over-threshold
- feedback loops
- leakage current compensation
Konference
16th Topical Seminar on Innovative Particle and Radiation Detectors