X-ray Based Methods for 3D Characterization of Charge Collection and Homogeneity of Sensors with the Use of Timepix Chip
Abstrakt
Timepix is a universal readout chip for pixel
detectors which can be connected to various semiconductor
sensors. The device has a 256x256 matrix of square pixels with a
pitch of 55 µm. Every single pixel is able to measure the collected
charge. The traditional material used for sensors is monocrystalline silicon (Si). However, other materials such as gallium
arsenide (GaAs) or cadmium telluride (CdTe) are applicable as
well. To describe the properties of the sensors it is important to
probe and evaluate the charge collection efficiency and its
homogeneity across sensor area (or if possible even in its volume).
A probing technique utilizing X-ray radiation applicable for
different sensor materials has been designed. A collimated
narrow line beam is applied to perform the 3D characterization
of the sensor volume. When the parallel beam hits the sensor at
small angles it penetrates the adjacent pixels at different but
known depths. This technique enables us to record the charge
collection efficiency for different depths in hit pixels. By scanning
the beam over the detector area we can characterize all pixels at
all depths.
In this work we present the 3D charge collection efficiency
maps obtained with several sensors: Si (300 μm), GaAs (300μm)
and CdTe (1000 μm).
Klíčová slova
Konference
IEEE Nuclear Science Symposium and Medical Imaging Conference 2011